50 Pin Hot-Swap Centronics (M - F)


Price: $29.95
Part Number: 5509

50 Pin Hot-Swap Centronics (M - F) (with Diagnostic)
SCSI Active Diagnostic Terminators

FINAL TERMINATOR
 
50Pin Centronics Terminator The SCSI Vue Diagnostic terminator with Active Regulation is both the best terminator on the market and a SCSI Bus Diagnostic analyzer. With the built in Active Regulation this terminator instantly adjusts to any system requirement. It provides exactly what the SCSI bus needs and improves performance.

it provides exactly what the SCSI bus needs and improves performance

 SCSI Vue helps you detect problems before they can cause damage to your data. The status indicators allow you to quickly diagnose how things are working. With SCSI Vue you have the peace of mind that you're operating at peak performance and your data is safe.
Active Termination
Diagnostic LED's
Gold Contacts
Lifetime Warranty


The SCSI Vue Diagnostic terminator reduces noise and increases signal strength. Diagnostic LED's indicate problem areas. Comes with 20 page manual.

Features and
Benefits
STATUS INDICATORS:
Diagnose problems.
Analyses signal quality.
DIAGNOSTIC LEDs:
4 LEDs indicating ACK,
REQ, SEL, and TRM power.
ACTIVE REGULATION:
Improves SCSI performance.
Fewer errors.
More reliable data transfer.
VOLTAGE REGULATION:
2.85 volts DC - 1.3 volts LVD
TRM: Indicates
Termination Power
SEL:
Indicates
Select line high.
TERMINATION TYPE:
Digital Active
GOLD CONTACTS:
Better conductor.
Quality construction.
 ACK: Indicates
Acknowledge line high.
REQ:
Indicates
Request line high.
     

SCSI Vue Active Diagnostic Terminator
up to 80MB/s (LVD - Ultra SCSI 2)

50Pin Centronics Terminator These LVD - SE Terminators auto sense and adjust automatically. Provides regulated voltage to all of the SCSI lines.

Reduces noise and increases signal strength. Diagnostic LED's indicate problem areas. Comes with 20 page manual.

- Active Ultra SCSI 3 Termination Increases Reliability and supports 80MB/s operation
-bullet01.jpg (2978 bytes) Provides Regulated SCSI Voltage for perfect termination on all Ultra SCSI 3 Buses
-bullet01.jpg (2978 bytes) Automatically Adjusts As SCSI Changes and works with both Ultra SCSI 1 Single Ended
and Ultra SCSI 3 (Low Voltage Differential)
-bullet01.jpg (2978 bytes) Matches Cable Impedance Needs and its high precision regulators guarantee performance
-bullet01.jpg (2978 bytes) Gold Connectors Reduce Noise. LEDs Diagnose SCSI Problems. Optional Remote LED Pak
 

Diag 1 - How To Use


In the above example, the
Hot-Swap Terminator is inserted in a SCSI Bus. Any of the devices to the right of it can be removed safely when the termination switch is turned on. These devices will no longer be available to the bus until the Hot-Swap termination is turned off and the last drive in the chain reassumes the job of terminating the bus.

Diag 1 - How To Use In this example, the Hot-Swap Terminator is being used as a supplemental power source. Since most Laptops and many Digital Cameras, etc. do not supply termination power the Hot-Swap can remedy this.

Search
Shopping Cart
Your cart is empty.